Category: Decorative stucco
Decorative product Ottocento creates a coating similar to the satin fabric, silk, or velour thanks to pearl gloss and smooth structure. It can change shade depending on the light and an angle of light incidence. The product is vapor permeable.
acrylic copolymer, pearl pigments, fillers, water, additives.
It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes, or with a coloring machine acc. to NCS color range and others.
It is recommended to use products from one batch to avoid the differences in shades of color.
Modifications in the technical properties of products are allowed after tinting.
Water. It is allowed to dilute it max. 10% of the total weight of the product.
0,15 -0,2 kg/m2 . depending on the technique of application and quantity of coats
24 hours. Drying period increases if the temperature gets down and relative air humidity icreases. Complete hardening of the coating is achieved in 28 days!
apply with plastic or stainless trowel, spatula and create the pattern with plastic trowel, brush or other decorative tool.
max 100 mkm
min 24 hours at the temperature 20 °С
18 months from the date of manufacture
Uncoated surfaces: сlean thoroughly from fragile coatings to the durable base of surface, also from dust, oil, grease, and other dirt.
Previously coated surfaces: clean the surface thoroughly from old loose coatings and from different dirties.
Insignificant defects of the mineral surface shall be corrected with finishing plaster TM Farbex and then polish.
It is recommended to treat the surface with the antiseptic solution for mineral surfaces TM Farbex for protection against fungi and mould.
Extremely absorbing surfaces shall be treated with a deep-penetrating primer TM Farbex or TM Maxima.
It is obligatory to apply a coat of adhesive primer with quartz filler QuartzPrimer TM Maxima or matt latex paint "Silk Touch 3" TM Maxima. The paint or QuartzPrimer shall be tinted in the color of decorative stucco.
Stir the paint thoroughly before use.
The first coat shall be applied thinly and evenly with a stainless spatula or a trowel. The second coat shall be applied thinly and evenly with a stainless spatula and trowel or plastic trowel after full drying of the previous coat.
The pattern shall be created with the spatula, trowel, brush, or other decorative tools. The choice of tool depends on the structure that you would like to receive.
Smooth the material with a stainless spatula, making the surface hard and evenly after 10-20 minutes of humidity stabilizing.
Perform the work at the temperature of air and surface from +10°С till + 30°С and maximal air humidity by 80%.
It is recommended to work in a group of two or three persons, as the work on a single surface shall be performed continuously.
Clean tools with water after application. Do not let them dry. The dry product shall be removed from the tools in a mechanical way.
It is intended for decorating mineral surfaces (cement and cement-lime plasters, filler, brick, gypsum, concrete, foam concrete) inside of premises with intermediate moisture. The material looks more attractive when a large amount of light hits it, as well as on large areas: corridors, stairways, living rooms, halls, bedrooms, etc.
Matt latex interior paint
Adhesive primer with quartz extender
Water-based pigment concentrate
Decorative coating with the effect of marble