Category: Decorative stucco

Stucco veneziano

Decorative coating with the effect of marble

Maxima decor

Decorative coating Stucco Veneziano is intended for interior finishing in classic style and "loft" style. It looks nice on the pillars and separate architectural elements of the interior (wall panels, arches, ceilings, pillars, etc.) It allows imitating a polishing cut of marble or natural stone if it is applied with a special technique and use of pigment pastes. It creates a hard and durable coating. It is vapor permeable.

It can be combined with other decorative coatings, like "Travertino", "Marmorino", "Art Beton" TM Maxima.


Select pack size:

Quantity:

Сomposition :

acrylic copolymer, fillers, water, additives.


Color :

white.


Tinting :

It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes, or with a coloring machine acc. to NCS color range and others.

It is recommended to use products from one batch to avoid the differences in shades of color. Mix the product if use different batches of it.

Modifications in the technical properties of products are allowed after tinting.


Technical data
Thinner :

water. Maximum diluting by 10% of the total mass is allowed


Application rate :

500 g/m² - 700 g/m² depending on the technique of application and quantity of coats


Drying period (20 °С, 60% RH) :

24 hours. Drying period increases if the temperature gets down and relative air humidity icreases. Complete hardening of the coating is achieved in 28 days!


Application :

-apply with a trowel or a stainless spatula;
- form the structure of the surface with a trowel and using various decorative tools for creatign of additional effects.


Density (DSTU ISO 2811-1) :

1,75 g/сm3


The degree of milling (SSU ISO 1524) :

maximum 5 microns


Solids content (DSTU ISO 3251) :

minimum 67%


Resistance to static effect of water :

minimum 24 hours at 20 °С


Warranty period :

18 months from the date of manufacturing


Application instruction
Surface preparation

Uncoated surface: remove all fragile particles, dust, oil, grease and other dirt till hard base surface.

Previously coated surface: clean thoroughly from old loose coats. Clean the surface from all kinds of dirt.

Insignificant defects of the mineral surface shall be corrected with finishing plaster TM Farbex and then polish.

It is recommended to treat the surface with the antiseptic solution for mineral surfaces TM Farbex for protection against fungi and mould.


Priming

Extremely absorbing surfaces shall be treated with a deep-penetrating primer TM Farbex or TM Maxima.

It is obligatory to apply a coat of adhesive primer with quartz filler QuartzPrimer TM Maxima or matt latex paint "Silk Touch 3" TM Maxima. The paint or QuartzPrimer shall be tinted in the color of decorative stucco.


Applying

Stir the product carefully before use.

The first coat of product shall be applied with a thin even layer with a stainless spatula or a trowel. Form original structure at the same time. Different decorative tools are allowed to achieve the variable structure of the surface (a sponge, a roller and others). Insignificant overlaps are allowed to achieve a more expressive appearance. The second coat is applied after the first one is completely dry with a stainless trowel, by making strokes in different directions. The third coat is applied after the second one is completely dry, applying the product with fine strokes in different directions.

Perform the work at the temperature of air and surface from +10°С till + 30°С and maximal air humidity by 80%.

It is recommended to work in a group of two or three persons, as the work on a single surface shall be performed continuously.


Applying of finishing layer

It is not recommended to use coating Stucco Veneziano as the only coating.

It is recommended to use wax CeraLavabile TM Maxima for additional protection and making decorative effects.

Way of application, characteristics and necessary tool for wax application is stated in TDS for Wax CeraLavabile TM Maxima or at our website.


Tool cleaning

Wash the tools with water. Don't let it get dry. Parts of rejected product can be removed mechanically.


Buy with this product

Quartz primer

Quartz primer

Adhesive primer with quartz extender

Wax

Cera Lavabile

Decorative wax for venetian stucco