Category: Decorative coatings
The Arabesk product creates an original sparkle decorative effect thanks to pearl microparticle and marble dust. It can change shade depending on the light and an angle of light incidence. The product is flexible, easy to use, and simple. It creates a hard durable and vapor permeable coating.
Free delivery by Nova Poshta for orders over UAH 2,000 in Ukraine
Adhesive primer with quartz extender
Water-based pigment concentrate
Category: Decorative coatings
The Arabesk product creates an original sparkle decorative effect thanks to pearl microparticle and marble dust. It can change shade depending on the light and an angle of light incidence. The product is flexible, easy to use, and simple. It creates a hard durable and vapor permeable coating.
acrylic copolymer, pearl pigments, fillers, water, additives.
silver .
It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes, or with a coloring machine acc. to NCS color range and others.
It is recommended to use products from one batch to avoid the differences in shades of color.
Modifications in the technical properties of products are allowed after tinting.
Water. It is allowed to dilute it max. 10% of the total weight of the product
0,17 - 0,25kg/m2. depending on the technique of application and quantity of coats’
24 hours. Drying period increases if the temperature gets down and relative air humidity icreases. Complete hardening of the coating is achieved in 28 days!
apply and create the pattern with stainless trowel, a brush and a spray gun
1,45 g/сm3
max 130 mkm
min 50%
min 24 hours at the temperature 20 °С
18 months from the date of manufacture
Uncoated surface: remove all fragile particles, dust, oil, grease and other dirt till hard base surface.
Previously coated surface: clean thoroughly from old loose coats. Clean the surface from all kinds of dirt.
Insignificant defects of the mineral surface shall be corrected with finishing plaster TM Farbex and then polish.
It is recommended to treat the surface with the antiseptic solution for mineral surfaces TM Farbex for protection against fungi and mould.
Extremely absorbing surfaces shall be treated with a deep-penetrating primer TM Farbex or TM Maxima.
It is obligatory to apply a coat of adhesive primer with quartz filler QuartzPrimer TM Maxima or matt latex paint "Silk Touch 3" TM Maxima. The paint or QuartzPrimer shall be tinted in the color of decorative stucco.
Stir the paint thoroughly before use.
Technique 1:
The coat of material shall be applied to the grain size with a trowel or stainless spatula. The necessity patterns shall be created by smoothing the surface in different directions with a trowel or spatula after 10-15 min from the application.
Technique 2:
The coat of material shall be applied to the grain size with a trowel or stainless spatula. Then the material shall be applied with a brush by stippling method after full drying. The necessity patterns shall be created by smoothing the surface in different directions with a trowel or spatula after 10-15 min from the application.
Technique 3:
The material shall be applied with a brush by voluntary movements. Spread quartz particles evenly on the surface. The necessity patterns shall be created by grouping quartz particles with a clean brush after 10-15 min from the application.
Technique 4:
Apply the material in 2 coats with a spray gun. The first coat applies in a vertical direction. The second coat applies in a horizontal direction after full drying of the previous coat.
Perform the work at the temperature of air and surface from +10°С till + 30°С and maximal air humidity by 80%.
It is recommended to work in a group of two or three persons, as the work on a single surface shall be performed continuously.
Wash the tools with water. Don't let it get dry. Parts of rejected product can be removed mechanically.
It is intended for decorating mineral surfaces (cement and cement-lime plasters, filler, brick, gypsum, concrete, foam concrete) inside of premises with intermediate moisture. The material looks more attractive when a large amount of light hits it, as well as on large areas: corridors, stairways, living rooms, halls, bedrooms, etc.
Adhesive primer with quartz extender
Water-based pigment concentrate
The " World Map" technique has already become a classical option for applying relief plasters and nacre coatings. It achieved its name due to it...
A hall seems to be the house's most visited premise because it is where people and things are constantly moving. This is the room, which suffers...
Decorating walls is a creative process, which helps add individuality and express personal style. Besides decoration does some more functions:
Decorative coating is an attractive option for the decoration of the room. Besides, decorative coatings can be applied without professional supp...
Nacre is caroled through the centuries by poets, painted by artists, liked by craftsmen and adored by elegant women. In Ancient Rome nacre was d...