Name: Silk Touch 1 Maxima 3,5 kg
Brand: Maxima
SKU: 79
Price: 698.40 UAH
Availability: InStock

Free delivery

Category: Paint

It is a latex paint with a perfect dead-matt effect. It obtains a high level of adhesion and easily spreads on the surface, thus it provides a low consumption rate and high level of coverage. It creates a hard coating, which is resistant to intensive repeated washing (1 class acc. to DSTU EN 13300). It is vapor permeable. It hides effectively microcracks on the surface. It is easy to apply. It doesn't run and splash during the process of application. It is tinted manually with pigment concentrate "Farbex Color", other waterborne tinting pastes, or with a tinting machine according to the NCS color rate and others.

Select pack size:

Free delivery

Free delivery by Nova Poshta for orders over UAH 2,000 in Ukraine

We recommend

Aqua Primer

Concentrated primer 1:10

We recommend

Finish Putty

Buy with this product

Aqua Primer Concentrated primer 1:10
Finish Putty

Description

Category: Paint

Details
Application instruction

Сomposition :

High-quality latex, pigments, fillers, water, additives.

Color :

white (base A).

Tinting :

Technical data

Consumption standard of 1 layer :

110-150 g/m². Depending on the way of application and type of the surface.

Thinner :

Water. Maximal dilution of 10 % of the total weight is allowed.

Application :

Apply with a roller, a brush or a spraying gun.

Drying period (23 °С, 50% RH) :

max. 1 hour. Drying period increases when the temperature is getting lower and relative air humidity is getting higher.

Solids content (DSTU ISO 3251) :

about 56%

Density (DSTU ISO 2811-1) :

about 1,47 g/cm³

Gloss (DSTU ISO 2813) :

max. 10 GU at 85°, (dead matt, DSTU EN 13300)

The degree of milling (SSU ISO 1524) :

max. 25 microns, (fine-grained, DSTU EN 13300)

Contrast ratio of dry film (ISO 6504-3) :

min. 99 %, 2 class of hiding power (acc. to DSTU EN 13300)

Wet-scrub resistance, microns (DSTU ISO 11998) :

max. 5 (after 200 cycles), 1 class of washability (acc. to DSTU EN 13300)

Warranty period :

36 months, (at the temperature from +5 °С till +35 °С)

Packaging :

1,2 kg, 3,5 kg, 6 kg, 12 kg

Application instruction

Surface preparation

Uncoated surface:

- Clean from dust, grease, and other dirt.

- Defected surfaces shall be removed with a Plaster for wood and mineral surfaces TM "Farbex". The dry surface shall be polished. After that remove abrasive dust.

- The surfaces in poor aired and wet premises shall be treated with antiseptic TM "Farbex".

- To make the surface hard, equalize absorbing ability, and improve adhesion of the surface it is recommended to treat the surface with a primer concentrate 1:10 TM "Maxima" or with a deep-penetrating primer TM "Farbex".

Previously coated surfaces:

- Clean the surface thoroughly from loose coatings, chalk and lime chalk coatings, and other dirt.

- Then treat the surface as an uncoated surface.

Applying

- Stir the paint thoroughly before application. If necessary dilute with water (maximum 10% of the total weight of the paint).

- Coating shall be performed at the temperature of air and the surface from + 10 °С to + 35 °С and relative air humidity less than 80%.

- Apply the paint in 1-2 coats with a roller or a spraying gun.

- Drying period of one coat of paint (23 °С; 50 % RH) is 1 hour maximum. Each subsequent coat shall be applied not before 2-4 hours.

- Application rate of one coat of paint is from 110 g/m² to 150 g/m² depending on the type of the surface and way of application.

- The surface achieves full washing ability in 3-4 weeks.

Tool cleaning

Wash the tools thoroughly with water. Do not let them dry.

Sphere of application

It is intended for interior surfaces, which are mad of mineral (cement and lime-cement plaster, stucco, gypsum, brick and concrete), wooden surfaces, wallpapers and fiberglass. It can be applied on the walls or ceilings in premises with moderate and advanced humidity: rooms for children, living rooms and offices, bedrooms, halls, clubs, showrooms, industrial premices, etc. It is not intended for floors, doors and furniture.

Content:

High-quality latex, pigments, fillers, water, additives.