Category: Decorative stucco

Galaxy Maxima decor 5 Kg

Decorative coating with pearl and glass microspheres

Maxima decor

Decorative product Galaxy makes light roughness which creates a twinkle effect from sunlight or sun rays. The product is flexible, easy to use, and simple.  The necessary patterns create by different techniques. The product is a hard durable and vapor permeable coating.

Select pack size:

3782.40 грн.
Сomposition :

acrylic copolymer, pearl pigments, glass microspheres, water, additives.

Color :

silver .

Tinting :

It does not recommend to tint the material!
Undercoating layer shall be tinted to color the whole coating.

Technical data
Thinner :

Water. It is allowed to dilute it max. 10% of the total weight of the product.

Application rate :

0,17 -0,2kg/m2. depending on the technique of application

Drying period (20 °С, 60% RH) :

24 hours. Drying period increases if the temperature gets down and relative air humidity icreases. Complete hardening of the coating is achieved in 28 days!

Application :

apply with a brush or roller and create a pattern with the brush

Density (DSTU ISO 2811-1) :

1,43 g/сm3

Particle size :

max 400 mkm

Solids content (DSTU ISO 3251) :

min 50%

Warranty period :

18 months from the date of manufacture

Application instruction
Surface preparation

Uncoated surface: remove all fragile particles, dust, oil, grease and other dirt till hard base surface.

Previously coated surface: clean thoroughly from old loose coats. Clean the surface from all kinds of dirt.

Insignificant defects of the mineral surface shall be corrected with finishing plaster TM Farbex and then polish.

It is recommended to treat the surface with the antiseptic solution for mineral surfaces TM Farbex for protection against fungi and mould.


High absorption surfaces shall be treated with deep penetration primer TM Farbex or TM Maxima.

The layer of  Matt latex interior paint "Silk Touch 3" TM Maxima shall be applied certainly on the surface.

The paint shall be tinted into the necessary color.


Stir the paint thoroughly before use.

The material shall be applied with a brush or roller in random moves. Quartz fraction shall be evenly distributed on the surface.  The necessity patterns shall be created by grouping fractions with a clean brush after 10-15 min from the application.

Perform the work at the temperature of air and surface from +10°С till + 30°С and maximal air humidity by 80%.

It is recommended to work in a group of two or three persons, as the work on a single surface shall be performed continuously.

Tool cleaning

Wash the tools with water. Don't let it get dry. Parts of rejected product can be removed mechanically.

Sphere of application

It is intended for decorating mineral surfaces (cement and cement-lime plasters, filler, gypsum, concrete), structure paints, and wallpapers. It uses inside of premises with high operation load: living premises, offices, stores, restaurants, saloons.

Buy with this product

Silk Touch 3

Matt latex interior paint

Popular items

Decorative stucco


Decorative coating with a sparkle effect

Decorative stucco


Decorative coating with quartz sand and pearl

Decorative stucco


Decorative coating with a velour effect

Decorative stucco


Decorative textured stucco