acrylic dispersion, mix of synthetic waxes. water. additives.
The product is tinted manually with pigment concentrate "Farbex Color", other tinting pastes or with a tinting machine according to NCS color rate and others.
It is recommended to use the product of one batch to avoid differences in color. Mix the product of different batches before use.
Slight deviations in technical properties are allowed after tinting.
85 - 100 ml/m2 depending on the technique of application and quantity of coats
6-12 hours. Drying period increases if the temperature is getting down and relative air humidity increases.
less than 24 hours при 20 °С
a roller, a spatula, a brush, a sponge
18 months from the date of manufacturing
Acrylic decorative materials (stuccos and coatings) need not advanced undercoating.
The surface shall be clean, dry and hard. Decorative base surface shall be completely dry.
Mix the wax thoroughly before use.
Add chosen pigment to the wax and mix it thoroughly before application. Apply the wax with a roller, a brush or a spatula on the base surface. After that soak the wax in with a cloth or a sponge till the effect you wish. Treat the surface with a plastic trowel to emphasize the structure.
Perform the works at the temperature of air and surface from +10°С till + 30°С and air humidity less then 80%.
Wash the tools with water after the work is finished. Don't let it dry. Rests of rejected product can be removed mechanically.
It is intended for protective application on decorative products «Marmorino», «Art Beton», «Travertino» TM Maxima and other interior surfaces (living premises, offices, etc.)