Arctic dune
Duna TM Maxima-decor is a gloss of nacre and texture of quartz sand. You can create the effect of sandy dunes, waterfalls or diagonals with it. Dune looks effective in one color and it is also very impressive if the design is done with two or more colors.
Decorative coating with quartz sand and nacre Duna TM Maxima-decor is easy to tint in any color with pigment concentrate Farbex Color. The actual color range you can find here.
Рriming
Priming is a necessary stage.
Apply on the surface deep penetrating primer-concentrate 1:10 AQUA PRIMER TM Maxima with a roller or a brush.
Before you start applying decorative coating, cover the areas, which are not meant to be coated, with masking tape and film.
Tinting of the base coating
Tinting Quartz Primer TM Maxima-decor
Carefully manually stir Quartz Primer TM Maxima-decor and tint it with pigment concentrate "FARBEX COLOR". Due to the brightness and saturation of the pigment, its consumption will be minimal.
The color is black.
Applying the base coating
QUARTZ PRIMER TM Maxima-decor has a high level of adhesion to the base surface. Using primer makes applying and forming decorative coatings easier.
Apply adhesive primer with quartz filler QUARTZ PRIMER TM Maxima-decor. As a tool use a roller with a 7-12 mm pile and roll it well to achieve a maximally smooth surface.
Tinting of decorative coating
*
Carefully manually stir DUNA TM Maxima-decor and tint it with pigment concentrate "FARBEX COLOR". Due to the brightness and saturation of the pigment, its consumption will be minimal.
We chose for tinting 3 pigment concentrates: blue (8 ml/1 kg), turquoise (8 ml/1 kg) and green (8 ml/1 kg).
Applying the decorative coating
Apply DUNA TM Maxima-decor on small areas with a brush with the synthetic or mixed pile. Carry out applying with vertical subsequent movements. Use a separate brush for each color. Apply different colors of DUNA subsequently or chaotically.
Work on the wet edge, leaving a minimal quantity of the product to avoid visible joints on the surface.
Correcting layer
Apply decorative coating DUNA TM Maxima-decor on the places, where you see gaps or rough color shifts.
Use a ceiling brush and form a desired direction of particles of quartz filler.
Tinting the decorative coating
Carefully manually stir DUNA TM Maxima-decor and tint it with pigment concentrate "FARBEX COLOR". Due to the brightness and saturation of the pigment, its consumption will be minimal.
We chose for tinting 2 colors of pigment concentrates: blue (3 ml/1 kg) and sandy (8 ml/1 kg).
Correcting layer
Apply DUNA TM Maxima-decor fragmentary with the synthetic or mixed pile vertically or chaotic movements.
Smooth contrasted edges and create a flowing shift of colors with sandy and blue colors. Use a separate brush for each color.
- 19.09.2023