Category: Primer for walls
Acrylic dispersion, water, additives.
colorless.
80-125 ml/m2, it depends on the type of the surface and way of application.
Water
It is applied with a roller, a brush or a spraying gun.
< 2 hours. Drying period increases if the temperature is getting down and relative air humidity is increasing.
about 7 %
about 1 g/сm3
18 months from the date of manufacturing
(at the temperature from +5 °С till +35 °С)
2 L, 5 L, 10 L
The base surface shall be dry, durable, without significant damages and free of chalk and lime whitewash, oil, bitumen and other dirt. Existing efflorescence, fragile and dirty areas shall be cleaned with a metal brush (spatula) or by machine method. Abrasive dust shall be removed.
Correct non-significant defects of a mineral surface with Finishing Putty TM Farbex. Sandpaper surface after it.
It is recommended to treat the surface with Antiseptic product TM Farbex for protection against mould and fungi.
Previously coated surfaces need no undercoating.
The primer shall be applied evenly with a brush, a roller or a spraying gun on the surface.
The temperature of the air and the surface under application shall be from +5 °С to +35 °С and relative air humidity no more than 80%.
The most absorbent surfaces shall be coated in 2 layers with a drying period 1 hour.
Do not undercoat under direct sunlight, strong wind, frost and precipitation. After the coating is applied it shall not be affected with precipitation and sub-zero temperatures till finishing coating is applied.
Subsequent works shall be done in 4 hours after the application of the last primer layer.
Clean tools with water after application. Do not let them dry.
It is intended for hardening of the surfaces, improving adhesion to different surfaces (bricks, concrete, slag blocks, concrete stuccos, chipwood boards, MDF, gypsum boards and other porous surfaces) before different finishing works with a plaster or a putty, coating with waterborne paints, gluing of wallpapers, application of tile, setting of parquet and other floorings. It is applied for interior and exterior works.
A primer is an important and obligatory stage before wall coating, applying a putty or plaster or setting the wallpapers. The primer penetrates ...
